Floor Marking Installation, Nationwide
Don't want to lay tape yourself? Kasama's crews install floor marking tape and indoor paint striping for warehouses, manufacturing plants, and distribution centers nationwide. Outdoor striping, including parking lots and asphalt, is available in Oregon and Washington.
Kasama is a verified SafetyTac installer. SafetyTac and Brady ToughStripe are the floor tapes we recommend and install most often.
Floor marking installation services | Get a free quote | Book a free safety walkthrough
Floor Marking FAQ
Does Kasama install floor marking outside of Oregon?
Yes. Our crews install floor marking tape and indoor paint striping for warehouses, manufacturing plants, and distribution centers nationwide. Outdoor services, such as parking lot and asphalt striping, are available in Oregon and Washington. Request a free quote or schedule a free safety walkthrough to get started.
Which floor marking tape does Kasama recommend?
SafetyTac and Brady ToughStripe are the floor tapes we recommend and install most often. Kasama is a verified SafetyTac installer and a verified Brady reseller. The right tape depends on your traffic, floor type, and how long the lines need to last, so a free safety walkthrough is the fastest way to choose.
What is the best floor marking tape for forklift traffic?
Choose a heavy duty floor tape made for forklift and pallet jack traffic. SafetyTac and Brady ToughStripe Max are the heavy duty tapes we recommend and install most often. Heskins PermaStripe and Durastripe Supreme V are also good options. Standard vinyl tapes aren't designed for forklift wheels, so they wear or lift quickly in busy aisles.
What is the difference between Brady ToughStripe and ToughStripe Max?
Brady ToughStripe is a durable floor tape for foot traffic, carts, and pallet jacks. ToughStripe Max is thicker and is built for heavy forklift traffic in high-wear aisles and loading docks.
When should I use 3M vinyl floor tape?
3M vinyl tapes, such as 471 and 764, are light duty tapes. They work well for low-traffic areas, temporary layouts, 5S color coding, and marking workbenches, racks, and equipment. 3M 766 (black/yellow) and 767 (red/white) add hazard stripes for physical hazards and restricted areas. For forklift aisles, use a heavy duty tape instead.
Does OSHA require floor marking?
Yes, in many cases. OSHA 29 CFR 1910.176(a) requires permanent aisles and passageways to be appropriately marked where mechanical handling equipment is used. OSHA does not set one required color scheme for floor lines, so most facilities adopt a consistent color standard and document it. See our Floor Marking Guidelines for a common color chart.
How wide should floor marking lines be?
OSHA guidance generally accepts aisle lines 2 to 6 inches wide. Most facilities use 2 to 4 inch tape for aisles and walkways, and wider lines for forklift lanes or high-visibility areas.
Should I use floor marking tape or paint?
Tape installs quickly with no cure time and can be removed or reconfigured, and heavy duty grades hold up in high-traffic areas. Paint requires surface prep, downtime, and periodic repainting. Kasama installs both and can help you choose during a free safety walkthrough.
Can I test floor tape before ordering?
Yes. Request free samples to check adhesion and durability on your own floors before you buy in bulk.
Not sure which tape fits your floors? A free safety walkthrough will match tape, color, and duty level to each area of your facility.